Skip to content
Gold$4,000.00Silver$50.00GSR80.0×Sample prices · not live
SimulateEnter any hypothetical gold or silver price per troy ounce to recalculate every value on the page. This is a what-if calculation, not a forecast. Clear the fields or choose Reset to live to return to the live prices.

Methodology

How Rawflation turns a coin's specifications and the silver price into a melt value — and the limits of what that number means.

The melt-value formula

Every melt value on this site is calculated, never stored or copied. For a single coin:

melt value = weight in grams × silver fineness ÷ 31.1034768 × silver price per troy ounce

The first three terms give the coin’s actual silver weight in troy ounces. For example, a Washington quarter weighs 6.25 grams at 0.900 fineness: 6.25 × 0.900 ÷ 31.1034768 = 0.1808 troy ounces. Multiply by the silver price to get the melt value. Each coin page shows this calculation with that coin’s own numbers.

The troy ounce

Precious metals are priced per troy ounce, which is exactly 31.1034768 grams — about 10% heavier than the everyday (avoirdupois) ounce of 28.35 grams. We use the exact figure in every calculation and round only the final result for display.

Coins defined in grains

U.S. silver dollars were defined by law in grains: 412.5 grains for the standard dollar and 420 grains for the Trade dollar. The familiar gram figures (26.73 g and 27.22 g) are roundings. For these coins we calculate from the exact grain weight — one grain is 0.06479891 grams — which gives the standard reference figure of 0.7734 troy ounces of silver for a Morgan or Peace dollar.

Bullion coins with a guaranteed content

Modern bullion coins such as the American Silver Eagle are specified by their mints as containing one troy ounce of fine silver. For these we use the guaranteed content rather than multiplying the published gross weight by fineness, because published weights are rounded and the two can differ by a fraction of a percent. Each affected coin page says so and shows both figures.

Where coin specifications come from

Weights, fineness and date ranges are checked against the issuing mint where it publishes them, and against established numismatic references. Every coin page lists the sources used for that coin. A coin is only included when its weight and fineness were confirmed by at least two sources; where that was not possible the coin was left out rather than estimated. See data sources for the full list.

One page covers each coin type across the years that share a design and a silver content — a Morgan dollar is the same 26.73 grams of 90% silver whether it is dated 1881 or 1921. Types are split wherever the metal changes, as with the 1964 and 1965–1970 Kennedy half dollars.

Gold, silver, platinum and palladium prices

Live spot prices for gold, silver, platinum and palladium come from Metals.dev, in U.S. dollars per troy ounce. Gold coins are valued exactly as silver coins are: weight × fineness ÷ 31.1034768 × the price of the coin’s own metal. The gold-to-silver ratio shown at the top of each page is simply the gold price divided by the silver price. One set of prices is fetched for the whole site and reused everywhere; it refreshes about every 5 minutes. The time of the price in use is shown at the top of every page and on each coin page.

If a live price is unavailable, the site says so plainly and shows a labelled sample price instead. A sample price is never presented as a market price.

Copper, nickel and zinc coins

Some U.S. coins contain no silver and are valued for their base metal instead, such as Lincoln cents dated 1981 or earlier, which are 95% copper. Their melt value is calculated the same way, in the units those metals are quoted in:

coin weight × metal fraction ÷ 453.59237 grams per pound × metal price per pound

Copper, nickel and zinc prices come from the same Metals.dev feed as silver, in the same single request, and refresh on the same schedule. Only metals whose share of the coin is fixed and verified are counted; anything else is listed on the coin’s page as not counted. These pages always say plainly that the coin contains no silver, and they are not affected by a simulated silver price. Melting U.S. one-cent and five-cent coins is prohibited by federal regulation (31 C.F.R. Part 82), so for those coins the melt value is a measure of the metal, not a way to cash it in.

Live prices and simulated prices

The Simulate spot field lets you enter any hypothetical silver price and see every value recalculated instantly. This is arithmetic done in your browser: it does not change the live price, does not contact the price provider, and is not a forecast of where silver will trade. While a simulation is active the page marks it clearly, and Reset to live returns to the market price. A simulated price can be shared in a link (for example ?spot=100); such links are for people, and are excluded from search-engine indexing.

Melt value is not collector value

Melt value answers one question: what is the silver in this coin worth? It deliberately ignores everything else.

  • Collector (numismatic) value depends on date, mint mark, condition and demand. Scarce or well-preserved coins can be worth many times their melt value. Never sell a coin for its silver without checking.
  • Dealer buy prices are often below theoretical melt value, because buyers have refining, handling and resale costs.
  • Bullion premiums push retail prices of bullion coins, and sometimes common silver coins, above melt value.

Circulation wear

Calculations use each coin’s official weight when struck. Coins that circulated have lost a little metal, so their real silver content is modestly lower. For 90% silver sold by face value, the bullion trade commonly allows for this by using 0.715 troy ounces per dollar of face value instead of the as-struck 0.7234. The junk silver calculator offers both.

Multiples of face value

“28.9× face” means the silver is worth 28.9 times the denomination stamped on the coin. It is shown only for coins with a U.S. dollar face value, since the silver price is in U.S. dollars. In a stack that mixes U.S. and other coins, the multiple covers the U.S. coins only.

Dealer / payout percentage

The optional payout control multiplies melt value by a percentage you choose, between 80% and 110%. It is a what-if estimator for thinking about offers. It is not a quote, does not reflect any particular buyer, and never alters the melt value shown beside it.

Corrections

If you believe a specification is wrong, the fastest way to check is the source list on the coin’s page. Specifications are corrected only against authoritative sources, and the dataset is covered by automated checks that reject impossible entries.