Australia · .925 silver
Australian Sixpence 1910–1945 (Sterling Silver) 1910–1945
Australian sixpences dated 1910 to 1945, struck in sterling (.925) silver at 2.83 g.
Not struck every year (none in 1913, 1915, 1929–1933 or 1937).
Melt value at the sample price
$4.21
- Face value
- 6 pence
- Silver content
- 0.0842 oz
- Silver spot
- $50.00 /oz
Calculated at a sample silver price, not a live market price.
Premium evaluator
Enter the price a dealer is asking to compare it with the melt value of $4.21 per coin.
Build a stack to total your gold and silver. Stored only in this browser.
How the melt value is calculated
Every step, with this coin’s own numbers. Change the price in Simulate spot at the top of the page and the calculation updates.
- 1. Silver in the coin2.83 g × 0.925 ÷ 31.1034768 = 0.0842 oz (2.618 g pure silver)
- 2. Silver price$50.00 per troy ounce
- 3. Melt value0.0842 oz × $50.00 = $4.21
About the Australian Sixpence 1910–1945 (Sterling Silver)
Australia's own silver coins were introduced in 1910 with a portrait of Edward VII; British coins had been used until then. The Coinage Act 1909 required sterling silver, 92.5% silver and 7.5% copper.
The sixpence shows Edward VII (1910), George V (1911–1936) or George VI (1938–1945). Unlike the other denominations, its reverse kept the 1908 coat of arms with ADVANCE AUSTRALIA for the whole life of the coin.
From 1946 the sixpence was struck in 50% silver at the same weight.
How to identify it
- Reverse: the 1908 coat of arms with SIXPENCE above and the date below.
- Check the date: 1945 or earlier is .925 silver; 1946 or later is .500 silver. The design is the same on both, so the date is the only guide.
- 19 mm across and 2.83 g.
Quick identification & value
- How much silver is in a pre-1946 Australian sixpence?
- About 0.084 troy ounces: 2.83 g of .925 silver.
- How do I tell a sterling sixpence from a 50% one?
- By the date. Coins dated 1945 or earlier are sterling; 1946 and later are 50% silver.
- Is melt value the same as collector value?
- No. Melt value is only the value of the silver. Scarce dates, mint marks and well-preserved examples can sell for much more to collectors, while a dealer buying for silver content may offer somewhat less than melt.
- Does circulation wear affect the value?
- Slightly. The figures here use the official weight when struck. Heavily worn coins have lost a little metal, so their real silver content is modestly lower — and wear usually matters far more to collector value.
Related coins and tools
Australian Shilling 1946–1963 (50% Silver)
1946–19630.0908 oz Ag
$4.54Face value 1 shilling
Australian Sixpence 1946–1963 (50% Silver)
1946–19630.0455 oz Ag
$2.27Face value 6 pence
Australian Shilling 1910–1944 (Sterling Silver)
1910–19440.1680 oz Ag
$8.40Face value 1 shilling
Australian Threepence 1910–1944 (Sterling Silver)
1910–19440.0419 oz Ag
$2.10Face value 3 pence
Sources and method
Specifications verified against
- Wikipedia: Sixpence (Australian coin)92.5% silver for 1910, 1911-36 and 1938-45; Coinage Act 1909 required 925 fine
- Wikipedia: Coins of the Australian poundWeights, compositions, designs and years of issue of each pre-decimal silver denomination
- Numista: 6 Pence - George VI, Australia1938-1945: silver (.925), 2.83 g
Method
Melt values are calculated from these specifications and the silver spot price; no value is stored or copied from another site. See the methodology and data sources.
Image
No licensed photograph is used for this coin. The medallion shown is an illustration generated from the coin’s specifications.